We have 20 mic inputs, Auto sense +48v phantom, & channel labels. 73db low noise gain, +32dbv max input level, 0db gain w/-93db noise floor

A front panel RGB LED acts as a VU meter for signal level and a +48v LED indicated Phantom power active. Signal LED goes “white” when input reaches Digital”0” clip level.

Gain, phantom power is set on the web page as well as the channel name.

System noise floor is -93dbv. Measured Analog XLR input to Analog XLR output with gain at unity. Signal measured in Dante is -113db floor noise. Auto phantom power reads +48v from the mix console presented to the mic output XLR. 12vdc and above generates +48v at the remote mic input jack, and is “thump-less” when switched on or off.

At the truck end, the XLR outputs have active and passive signal level attenuation. Normal Level +4dbv with a 30db passive pad and 20db adjus-table pad in 1db increments. These same XLR outputs sense the +48vdc phantom from the console inputs and automaticaly turn on/off Phantom power to the mic inputs.